| Wanna Instantly Sound Like A Guitar God?
Our AweSome products will exceed your desire for Quality, Usefulness and Value.
| (Click Image for Larger Size)
T2 Upgrade Wiring
| (Click Image for Larger Size)
T3PJ Upgrade Wiring
This Black acrylic Player Jaguar Bass Upgrade is for instruments with PJ pickups. You can choose either our T2-Switch to give you 6 pickup tones or our T3PJ-Switch to give you 21 pickup tones on your Player Jaguar Bass or similar instrument projects with PJ pickup coil configuration.
Now you can Soup Up your Player Jaguar Bass to get more pickup tone power and also increase your creativity and versatility with additional fresh new pickup tones.
Your stock bass is designed to give you a modest and inadequate 3 pickup tones. Don't you think it's worth a few dollars more to get a Grand Canyon Wide range of Blues, Jazz, Metal, Surf, Country plus the dozens of new and different pickup tones your stock bass simply cannot produce?
This EZ Install high performance upgrade gives you the ultimate in performance at the lowest cost.
| Customer Comments: |
"After installing this upgrade in my bass, I stayed up all night playing it." Alvin Sears
"I am SO pleased with the upgrade. The standard volume blend controls is an 8-pack of Crayolas when compared to your upgrade which is the 98-pack with built in sharpener. I now have colors I didn't even know I wanted. Do I need EACH of the additional tones? No, of course not; but there are many new tones which, now that I have heard them, I cannot live without. The next time I buy a bass, your products will be that instrument's first upgrade!" Branden Garner
You can upgrade these instruments.
(1) If your instrument contains any of the following items, our product does not include them; greasebucket circuit, passing lane switch, S1 Switch, push-push mini switch, TBX or mid boost circuit.
(2) Passive only, active components discarded.
Is your instrument in this list? < Less
This upgrade uses our T2-Switch.
Using our T2-Switch, you can
So with Switch SW5 in the Down position, you get the four pickup tones described above. You can turn on the Bridge pickup by itself, the Neck pickup alone, both the Bridge and Neck pickup together (in normal phase), as well as the Bridge and Neck pickup together (in reverse phase).
When you put Switch SW5 in the Up position, you get the following two additional pickup tones with both pickups connected in Series. This gives you a warmer and more humbucking Jazz tone, that you just cannot get with your stock instrument.
You get six pickup tones with this upgrade. < Less
Simple pickup rewiring is needed with this upgrade. You will cut the wire that connects the two "P" coils and attach extra wire (supplied) using the included solderless terminal connectors. This separates the "P" pickup into two separate pickup coils. Use an ohmmeter to confirm that the wires connected to the pickups read continuity. Once rewiring is completed,
This upgrade uses our T3PJ-Switch.
The T3PJ-Switch contains five mini-toggle switches (from rear-to-front): (SW1, SW4, SW2, SW5, SW3)
These switches are used to control the Bridge ("J" / coil-1) pickup, and the Middle/Neck ("P" / coil-2 and coil-3) pickup coils.
SW1 is an ON-OFF-ON switch used to turn the Bridge "J" (Jazz Bass) pickup coil-1 Off and On. The middle position of this switch is Off. The Down position turns the pickup On (in normal-phase) and the Up position turns the pickup on (in reverse-phase).
SW4 is an ON-ON switch used to put the Bridge "J" and "P" pickup coils in either a Parallel connection or Series Connection. Down is Parallel, and Up is Series. When Down, the "J" pickup (coil-1) or the "P" pickup coils (coil-2 and coil-3) can be turned On either separately or together. When Up, both PJ pickup coils MUST be in an On position (see SW1 and SW2) or no sound will be produced.
SW2 is an ON-OFF-ON switch used to put the "P" pickup coils (coil-2 and coil-3) On. The middle position of this switch is Off. The Down position turns the "P" pickup coils On. When Down, the "P" pickup coils can be further controlled by SW5 and SW3 using the rules described for these switches. The Up position is non-functional. (if SW4 is Up, this switch must be On)
SW5 is an ON-ON switch used to put the "p" pickup coils (i.e., coil-2 and coil-3) in Parallel connection or Series Connection. When Down, the two coils are in Parallel connection. When Up, the two coils are in Series connection.
SW3 is an ON-ON switch used to change the phasing of the "P" pickup coils (i.e., coil-2 and coil-3). Down puts the coils in normal-phase and Up position puts the pickup in reverse-phase.
You get 21 pickup tones with this upgrade. < Less
You need the following tools (not supplied with purchase).
We accepts all returns. You get a 30-Day Return Guarantee on all ALL your upgrade products. You can use your Upgrade for 30 days. If you don't agree this is the greatest product ever, return it for a refund no questions asked. Buyer receives full refund in their original payment method (see our website FAQ for warranty details.)
Because you get a 30-day Return guarantee, you can buy this upgrade with confidence. You have nothing to lose except your lack of creativity.
|Shipping:||All products are shipped via United States Postal Service. Allow 7-10 days for delivery.|
|Details:|| Shipping generally occurs within three business days of payment. |
Saturday, Sunday and postal holidays are not business days.
Notes: Ask questions before purchasing. Purchaser assumes all risk of liability with respect to the installation and use of these products.
This switching system cannot be directly used with active (battery-powered) pickups or pizeo pickups.