Awesome Guitars website
(Additional links are on the bottom of this page)
 

VT-1 Stacked Volume-Tone assembly

Our AweSome products will exceed your expectations for Quality, Usefulness and Value.


(Click Image for Larger Size)

Product Description


ID: 151VT-1 Stacked Volume-Tone assembly

This product is for your instrument projects that do not have adequate body cavity space to install our VT-2 Volume-Tone Control assembly.

You get an assembled and tested VT-1 Stacked Volume-Tone assembly designed to be used with any of our core high performance Pickup Switch UpgradeTM products (i.e., T2/T3/T4 switch products).

Special Note: All of our Volume-Tone controls are designed to be used with our switch products (i.e., T2P-Switch, T2-Switch, T3-Switch, T4-Switch, T4M-Switch). Although they can be used in different applications, we do not provide support for these non-AweSome efforts.

Here Is What Is Included

  • One (ID: 151a) VT-1 Stacked Volume-Tone assembly with chrome knobs. Wired and tested. Both controls are audio taper, 500,000 ohms, .047mfd ceramic capacitor
    Mounting hole diameter: 11/32" (8.73mm)
  • Two chrome knobs

Tools You Need To Install This Product

To install this product, you will need one or more of the following tools (not supplied with purchase). Purchaser assumes all risk of liability with respect to the purchase, installation and use of this product.

  • Soldering iron (25 watt is recommended) with fine tip, rosin core solder
  • Wire cutters / wire strippers, regular pliers
  • Small needle nose pliers
  • Electric drill, 9/32" (7.15mm) drill bit, 1/2" (12mm) drill bit, 1/4" (6.5mm) drill bit, 1/16" (1.59mm) drill bit, center punch
  • Small phillips screwdriver, small straight slot screwdriver
  • 5/64" (1.97mm) hex wrench for knob locking screws
  • 6" (15.24cm) adjustable crescent wrench
  • Ohmmeter to measure continuity

To Purchase this Product

(ID: 151a) VT-1 Stacked Volume-Tone Assembly Qty
Click Here To View Cart



Shipping Details

Shipping: All products are shipped via United States Postal Service. Allow 7-10 days for delivery.
Shipping Details: Shipping generally occurs within three business days of payment.
Saturday, Sunday and postal holidays are not business days.

Other Information

Notes: Ask questions before purchasing. Purchaser assumes all risk of liability with respect to the installation and use of these products.

This switching system cannot be used with active (battery-powered) pickups or pizeo pickups.

Active (i.e., battery-powered) pickups manufactured by Bartolini, EMG, Seymour Duncan, etc. will not work with our growing family of high performance patented Pickup Switch UpgradeTM products. These active pickups use a design that prevents any of the pickups from being put into series because it sends -9VDC back to the first pickup, shorting out the circuit. Although some manufacturers now sell "add on" products to give you some of the functionality that our products automatically provide, this design limits their versatility and increases the cost to the musician. Many people who have tried these products remove them because they are "too sterile sounding". Anything that uses batteries will likely go dead at a crucial time - like when you're performing or in the recording studio. Bill Lawrence was right when he said, "Batteries belong in flashlights."






Share |

© 2001- Offer content and all product descriptions copyright by AweSome Musical Instruments.   All rights reserved worldwide.
All content, images and text found herein under this domain are protected under all applicable United States and International intellectual property laws.

2011 © Graphic Design Carla Rossetti - Artistixdesignz

Valid CSS!