Our AweSome products will exceed your expectations for Quality, Usefulness and Value.
(Click Image for Larger Size)
ID: 142 Kill (Stutter) Switch K2 Kit
This Kill (Stutter) Switch kit is designed for the the non-Les Paul style guitar (Strat, etc.) It adds this functionality to your upgraded instrument that contains our switch products. This high quality switch is rated at 1,000,000 cycles mechanical life for extended use without premature failure. Why use an "el cheapo" switch that you will have to replace every few months?
Note: Installing this product at the location you desire may require body wood removal.
Special Note: Instrument with any of these items, our products do not include or use them:
- Greasebucket circuit
- Passing lane switch
- Personality cards
- Push-push mini switch
- S1 Switch
- TBX or mid boost circuit
- Any special controls beyond the standard 3-way or 5-way switch
Here Is What Is Included
- One (ID: 142a) Kill (Stutter) Switch K2 kit wired and tested for Strat and other instruments
1/4" (6.5mm) diameter hole mounting
- One 10" length of insulated, double-shielded 2-conductor wire
- Two grey wire nuts (71B) to connect the Kill switch to the instrument input jack hot and ground wires
Tools You Need To Assemble and Install This Product
To install this product, you will need one or more of the following tools (not supplied with purchase). Purchaser assumes all risk of liability with respect to the purchase, installation and use of this product.
- Soldering iron (25 watt is recommended) with fine tip, rosin core solder
- Wire cutters / wire strippers, regular pliers
- Small needle nose pliers
- Electric drill, 9/32" (7.15mm) drill bit, 1/2" (12mm) drill bit, 1/4" (6.5mm) drill bit, 1/16" (1.59mm) drill bit, center punch
- Small phillips screwdriver, small straight slot screwdriver
- 6" (15.24cm) adjustable crescent wrench
- Ohmmeter to measure continuity
How To Install This Product
To install this product, you need to identify where it will be mounted. It requires a 1/4" mounting hole. Body cavity material may need to be removed to permit mounting this product.
Use the included two grey wire nuts (71B) to attach the other end of the K2 switch wire to the input jack. Red to the signal connection, black to the ground connection.include("0-guarantee.inc"); ?>
To Purchase this Product
Shipping: All products are shipped via United States Postal Service. Allow 7-10 days for delivery. Shipping Details: Shipping generally occurs within three business days of payment.
Saturday, Sunday and postal holidays are not business days.
Notes: Ask questions before purchasing. Purchaser assumes all risk of liability with respect to the installation and use of these products.
This switching system cannot be used with active (battery-powered) pickups or pizeo pickups.
Active (i.e., battery-powered) pickups manufactured by Bartolini, EMG, Seymour Duncan, etc. will not work with our growing family of high performance patented Pickup Switch UpgradeTM products. These active pickups use a design that prevents any of the pickups from being put into series because it sends -9VDC back to the first pickup, shorting out the circuit. Although some manufacturers now sell "add on" products to give you some of the functionality that our products automatically provide, this design limits their versatility and increases the cost to the musician. Many people who have tried these products remove them because they are "too sterile sounding". Anything that uses batteries will likely go dead at a crucial time - like when you're performing or in the recording studio. Bill Lawrence was right when he said, "Batteries belong in flashlights."