Our AweSome products will exceed your expectations for Quality, Usefulness and Value.
(Click Image for Larger Size)
ID: 102 T34 Trim Plate
This is an aluminum trim plate to give your installation of our T3-Switch or T4-Switch product a more finished look, as well as hide any visible installation imperfections. Because a volume-tone control set must be removed from LP-style instruments to provide the necessary space to install either the T3-Switch or T4-Switch product, the empty volume-tone control mounting holes will be visible. Our T34 trim plate hides these empty mounting holes after installing our T3-Switch or T4-Switch product.
Here Is What Is Included
- One (ID: 102a) Trim Plate T34
Tools You Need To Install This Product
To install this product, you will need one or more of the following tools (not supplied with purchase). Purchaser assumes all risk of liability with respect to the purchase, installation and use of this product.
- Soldering iron (25 watt is recommended) with fine tip, rosin core solder
- Wire cutters / wire strippers, regular pliers
- Small needle nose pliers
- Electric drill, 9/32" (7.15mm) drill bit, 1/2" (12mm) drill bit, 1/4" (6.5mm) drill bit, 1/16" (1.59mm) drill bit, center punch
- Small phillips screwdriver, small straight slot screwdriver
- 6" (15.24cm) adjustable crescent wrench
- Ohmmeter to measure continuity
To Purchase this Product
Shipping: All products are shipped via United States Postal Service. Allow 7-10 days for delivery. Shipping Details: Shipping generally occurs within three business days of payment.
Saturday, Sunday and postal holidays are not business days.
Notes: Ask questions before purchasing. Purchaser assumes all risk of liability with respect to the installation and use of these products.
This switching system cannot be used with active (battery-powered) pickups or pizeo pickups.
Active (i.e., battery-powered) pickups manufactured by Bartolini, EMG, Seymour Duncan, etc. will not work with our growing family of high performance patented Pickup Switch UpgradeTM products. These active pickups use a design that prevents any of the pickups from being put into series because it sends -9VDC back to the first pickup, shorting out the circuit. Although some manufacturers now sell "add on" products to give you some of the functionality that our products automatically provide, this design limits their versatility and increases the cost to the musician. Many people who have tried these products remove them because they are "too sterile sounding". Anything that uses batteries will likely go dead at a crucial time - like when you're performing or in the recording studio. Bill Lawrence was right when he said, "Batteries belong in flashlights."