Awesome Guitars website
   
====================
(Additional links are on the bottom of this page)
 

LP-Style Upgrade

All of our products are individually packaged. Each product contains a unique 12-digit UPC Barcode.

Our AweSome products will exceed your expectations for Quality, Usefulness and Value.


(Click Image for Larger Size)

Product Description


ID: 050 An LP-Style Upgrade for 2 pickup coil instruments

This is a special LP-Style upgrade that uses our T2-Switch, part of our growing family of of High Performance patented Pickup Switch UpgradeTM products. Once you install this upgrade product and connect your pickups, a HUGE alternate tone dimension of 6 pickup tones will instantly open up to you.

This product gives you the control over your pickup coils that a 3-way switch doesn't provide. You can control each pickup individually or in combination. You can turn on just one coil for clean, crisp tones. You can put both pickup coils in either normal phase or reverse phase. And each of the two pickups can be in a parallel circuit or a series circuit. This gives you incredible control over what your instrument sounds like. You can put both pickup coils in series and normal phase to get DuoBuckerTM pickup tones that are impossible to get with your stock instrument. With the two pickups in series and in reverse phase, you get unique tones for rhythm playing, funky leads, and incredible glass-shattering piercing tones that you never thought possible.

This upgrade lets you can control both 2-wire pickups (either separately, or combined) for:

  • on or off connections
  • normal-phase or reverse-phase connections
  • series or parallel connections

No production guitar exists that will give you this incredible range of jaw-dropping pickup tones.

Upgrade Overview

This upgrade is for instruments with a single volume and tone control.

The 3-way switch on the upper horn will not be functional. You can either leave it intact so the guitar appears more "stock" or replace it with our long-life kill switch (see below).

Special Note: Our products do not support the following items:

  • Piezoelectric pickups
  • active (i.e., battery powered) pickups

Why You Should Upgrade

This high performance upgrade product will Give You Amazing Tones Without Changing Your Pickups. This is like an artist finding more colors of paint to work with.

Now you can get almost every pickup tone ever created on your upgraded guitar:
Blues, Jazz, Metal, Surf, Country, Glass-Shattering Tin-Canny pickup tones.

This upgrade will virtually give you the Signature Sound of many guitar gods since the 1940s.

After you install this amazing Pickup Switch UpgradeTM product into your LP-Style guitar, you can pretty much duplicate the sound of most electric guitars, as well as give you single-coil or humbucker pickup tones! This simple upgrade product will give you several dozen new pickup tones that you have NEVER heard before.

In summary, this upgrade product will give you the ultimate "Holy Crap" experience!

Using The Upgrade

Here is how the controls of this upgrade product are laid out from rear to front:

































   ( <-- guitar rear) SW1  SW5  SW3 (guitar front --> )

Switch SW1 controls the Bridge pickup. Center position is Off, Down position in normal phase, Up position is reverse phase.

Switch SW5 controls whether the two pickups are in a parallel connection (down) or a series connection (up).

Switch SW3 controls the Neck pickup. Center position is Off, Down position in normal phase, Up position is reverse phase.

With Switch SW5 in the Up position, both pickups must be On (either in normal phase or reverse phase) or you will not hear any output. This is because the two pickups will be in a series circuit.

In summary, the combinations of these switches will give you six pickup tones.

What You Get

This is an upgrade for your LP-Style guitar that has two 2-wire pickups and has one volume control and one tone control. This means that it can be also used to upgrade almost all LP-Style guitars (Gibson, Epiphone, PRS, etc.) that meet this requirement.

This upgrade uses our T2-Switch to give you 6 pickup tones. You also get a Parts Bag that includes everything you need to successfully complete the upgrade. You will be downloading the easy-to-follow installation instructions in PDF format from our website.

This upgrade product includes a laser cut trim plate as well as nautical grade stainless steel flat washers so your upgrade will look "professional." It also means you don't have to worry about this upgrade starting to rust after a few weeks of sweaty hand use.

Although surprisingly easy to install, we will rate the installation difficulty level at somewhere slightly less than intermediate. Working slowly, it will take you about 67 minutes to complete this upgrade. This upgrade product can be used in all LP-Style electric guitars that have two 2-wire pickups as well as one volume control and one tone control.

Here are some things you should know about this newly-released upgrade product.

The difficulty level for installing this upgrade is intermediate. This means you don't need hand holding to install this upgrade.

You are OK with using a soldering iron, hand tools, an electric drill, ohmmeter, and can follow pictorial diagrams and schematics.

If your guitar has two sets of Volume/Tone controls, one set will be permanently removed. The remaining Volume/Tone control will be used to control all of your pickup coils. Simplicity is much better, don't you agree?

You are OK with drilling three holes in your guitar to mount our T2-Switch.

Piezoelectric pickups or active (i.e., battery powered) pickups cannot be used with this upgrade.

Your 3-way switch will not work after the upgrade. You can leave it there for aesthetic appearance to make it look "stock", replace it with our long-life kill switch, or just remove it and cover it with a metal or plastic hole plug – that's your choice.

Upgrade Requirements

You are OK with using a soldering iron, electric drill and other hand tools; or you know a guitar technician that can install this upgrade for you. You will permanently remove the lower (i.e, bridge) volume and tone controls, drill three additional holes in your instrument to permit the mounting of our T2-Switch product. You will also minimally rewire the remaining Volume and Tone control, and making the needed connections to our T2-Switch product to get 6 pickup tones from your upgraded instrument.

Instruments That Can Be Upgraded

You can upgrade instruments with two 2-wire pickups.

Here Is What Is Included

  • One (ID: 050a) Les Paul style upgrade, includes our assembled and tested T4-Switch
    Minimum body cavity clearance dimensions for this product:
        0.94" wide x 1.50" long x 1.15" deep (2.38cm x 3.81cm x 2.92cm)
  • One (ID: 100) Trim Plate T2S
  • 10" (25.4cm) insulated 26-gauge red/black wire pair (to extend existing wires if needed)
  • 1" (2.54cm) clear shrink tube to insulate connections
  • 2 grey wire nuts (71B)
  • URL to download easy-to-follow instructions from our website Document Library
    (You can view the product assembly, installation and use instructions HERE.)

Tools You Need To Install This Product

To install this product, you will need one or more of the following tools (not supplied with purchase). Purchaser assumes all risk of liability with respect to the purchase, installation and use of this product.

  • Soldering iron (25 watt is recommended) with fine tip, rosin core solder
  • Wire cutters / wire strippers, regular pliers
  • Small needle nose pliers
  • Electric drill, 9/32" (7.15mm) drill bit, 1/2" (12mm) drill bit, 1/4" (6.5mm) drill bit, 1/16" (1.59mm) drill bit, center punch
  • Rotary file bit
  • Small phillips screwdriver, small straight slot screwdriver
  • 6" (15.24cm) adjustable crescent wrench
  • Ohmmeter to measure continuity

One-Year Return Policy

Our AweSome return policy accepts all returns. We now offer an unprecedented One-Year Return Guarantee on all ALL our upgrade products. This means that You can use this incredible AweSome Upgrade for an entire 365 days. If you don't agree this is the greatest product ever, return it for a refund — no questions asked.

Lifetime Guarantee

In addition, our "core" Pickup Switch Upgrade™ switch products (T2-Switch, T3-Switch, T4-Switch) now come with a Lifetime Guarantee. If it ever fails, we will repair or replace it (see our website FAQ for details.) Return shipping and insurance paid by purchaser. User-assembled KIT versions of our "core" Pickup Switch Upgrade™ products are not covered by our Lifetime Guarantee.

Refund Policy

Buyer receives full refund in their original payment method less any shipping and handling charges.

To Purchase this Product

(ID: 050a) LP-Style Upgrade for 2 pickup coils Qty



Consider Adding The Following Related Customer-Installed Items

(ID: 141a) One Kill (Stutter) Switch K1            
for LP-style instruments
Qty
Click Here To View Cart


Shipping Details

Shipping: All products are shipped via United States Postal Service. Allow 7-10 days for delivery.
Shipping Details: Shipping generally occurs within three business days of payment.
Saturday, Sunday and postal holidays are not business days.

Other Information

Notes: Ask questions before purchasing. Purchaser assumes all risk of liability with respect to the installation and use of these products.

This switching system cannot be used with active (battery-powered) pickups or pizeo pickups.

Active (i.e., battery-powered) pickups manufactured by Bartolini, EMG, Seymour Duncan, etc. will not work with our growing family of high performance patented Pickup Switch UpgradeTM products. These active pickups use a design that prevents any of the pickups from being put into series because it sends -9VDC back to the first pickup, shorting out the circuit. Although some manufacturers now sell "add on" products to give you some of the functionality that our products automatically provide, this design limits their versatility and increases the cost to the musician. Many people who have tried these products remove them because they are "too sterile sounding". Anything that uses batteries will likely go dead at a crucial time - like when you're performing or in the recording studio. Bill Lawrence was right when he said, "Batteries belong in flashlights."






Share |

© 2001- Offer content and all product descriptions copyright by AweSome Musical Instruments.   All rights reserved worldwide.
All content, images and text found herein under this domain are protected under all applicable United States and International intellectual property laws.

2011 © Graphic Design Carla Rossetti - Artistixdesignz

Valid CSS!